Add 2 X Gigabit Ethernet ports to your Sparky with this Shield. Installs in a snap and increases the versatility of your Sparky.
These 2 x GB Ethernet ports connect to Sparky by USB 3.0. We have reached packet transfer speeds of 200Mbps with both ports working and up to 600Mbps on a single port (speeds are for packet transfer only without additional security/services added). These transfer rates are more than acceptable for a house/SOHO and even SMB set up.
Sparky + GIGA Shield can be used to run many different open source applications such as:
|Input Voltage||5V (from main board)|
CLICK HERE FOR AUDIO SUPPORT
(You will be directed to ComputerAudiophile where we have centralized our support center)
Copyright © Allo.com - All Rights Reserved